Products 1-33 of 33
Show
XtreamBee USB XBee Adapter
Retail: $25.00
Price: $12.50
Availability: Out of Stock
Item #: 82P-AD-XB-USB-Adapter -

This is the most advanced Xbee interface board you will find. This is a simple to use, USB to serial base unit for the XBee line. Plug the unit into the XBee Explorer, attach a mini USB cable, and you will have direct access to the serial and programming pins on the XBee unit. Features Many LEDs (Power, Rx/Tx, ASC/RSSI LED) Jumper allows you to power board directly with 3.3V (only reccomended in 'Slave Mode') Mini USB connector Holes for easy mounting   Contents 1x XtreamBee USB interface...

Smart Robot Car Chassis Kits with Speed Encoder Battery Box
Retail: $29.95
Price: $12.95
Availability: Out of Stock
Item #: 82P-AD-Smart-Car-Kit -

This is a well designed robot car chassis kit suitable for Arduino mobile robot development platform. You can build it and program it easily with tons of published free codes. The high-strength body provides flexibility in rapid movement particularly in outdoor grass, gravel, sand or sloped surface. Add a variety of sensors to make the robot perform all different kinds of tasks. Product Features: Mechanical structure is simple, very easy to install The car comes with tachometer encoder A four...

SD Card Module for Arduino
Retail: $4.75
Price: $1.50
Availability: Out of Stock
Item #: 82P-AD-SD -

The Arduino SD Card Shield is a simple solution for transferring data to and from a standard SD card. The pinout is directly compatible with Arduino, but can also be used with other microcontrollers. It allows you to add mass storage and data logging to your robotics projects. Features: Break out board for standard SD card and Micro SD (TF) card Contains a switch to select the flash card slot Sits directly on a Arduino Board Compatible with other microcontrollers ...

Micro SATA Cable - USB 2.0 to TTL UART 6PIN Module Serial Converter CP2102
Retail: $6.65
Price: $2.90
Availability: In Stock
Item #: 82P-AD-SataCable -

Use this device to connect your PC to a serial (TTL level) device. Uses CP2102 chipset and has a standard 0.1" pitch terminal strip to connect directly to UART or I/O pins for easy access to your MCU. It features a USB to TTL Serial Converter, USB to TTL Adapter. USB specification: USB 2.0 compliant with full-speed 12Mbps. Standard USB type A male and TTL 6pin connector. 6 pins for 3.3V, RST, TXD, RXD, GND & 5V. Includes all handshaking and modem interface signals.  Baud...

Real Time Clock Module w/ Battery
Retail: $5.50
Price: $2.70
Availability: Out of Stock
Item #: 82P-AD-Real-Clock -

Key Features Model DS1307 Quantity 1 Color Blue Material Glass fiber Specification DS1307 chip, Onboard AT24C32 IIC port EEPROM storage, 20 ppm 32.768KHz crystal oscillator Features Solder 1 x CR927 3V battery, with reversed polarity protection Application DIY projects Packing List 1 x Module Specifications Dimensions: 3.0 cm x 2.6 cm x 0.7 cm Weight: 0.2oz

10 pcs Mini Push Button Switches 6x6x5 For Arduino Electronic DIY
Retail: $2.28
Price: $0.90
Availability: Out of Stock
Item #: 82P-AD-MiniButton-10 -

10 pcs Mini Push Button Switches 6x6x5 For Arduino Electronic DIY

10pcs 30cm shield jumper cables 4pin Female to 4pin Female(4pin F/F) 24AWG (Assorted Color)
Retail: $6.65
Price: $1.60
Availability: Out of Stock
Item #: 82P-AD-Jumper-10 -

10pcs 30cm shield jumper cables 4pin Female to 4pin Female(4pin F/F) 24AWG (Assorted Color)

Intelligent Robot Car Chassis Kits with Speed Encoder Battery Box
Retail: $29.95
Price: $19.95
Availability: Out of Stock
Item #: 82P-AD-Intel-Car-Kit -

This is a well designed chassis for Arduino mobile robot development kit platform. You can build it and program it easily with tons of published free codes. The high-strength body provides flexibility in rapid movement particularly in outdoor grass, gravel, sand or sloped surface. The intelligent robot car chassis kit comes equipped with larger diameter tires and more aggressive tread pattern and a slimmer track to climb over obstacles easier. Product Features: Mechanical structure is simple,...

8 pin 1" Tall Female Stackable Header (10pcs)
Retail: $5.32
Price: $1.30
Availability: In Stock
Item #: 82P-AD-Header-8Pin-10 -

8 pin 1" Tall Female Stackable Header (10pcs)

6 pin 1" Tall Female Stackable Header (10pcs)
Retail: $4.75
Price: $1.40
Availability: Out of Stock
Item #: 82P-AD-Header-6Pin-10 -

6 pin 1" Tall Female Stackable Header (10pcs)

HC-SR501 Human Sensor Module Pyroelectric Infrared
Retail: $3.50
Price: $2.20
Availability: In Stock
Item #: 82P-AD-HC-SR501 -

Specifications: Operating voltage range: DC 4.5-20V Quiescent Current: <50uA Level output: High 3.3 V /Low 0V Trigger: L cannot be repeated trigger/H can be repeated trigger(Default repeated trigger) Delay time: 5-200S(adjustable) the range is (0.xx second to tens of second)  Block time: 2.5S(default)Can be made a range(0.xx to tens of seconds  Board Dimensions: 32mm*24mm Angle Sensor: <100 ? cone angle Operation Temp: -15℃-+70℃ Lens size sensor: Diameter:23mm(Defaul...

DHT11 Temperature-Humidity Sensor
Retail: $2.90
Price: $1.80
Availability: Out of Stock
Item #: 82P-AD-DHT11-Sensor -

The DHT11 is a basic, ultra low-cost digital temperature and humidity sensor. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air, and spits out a digital signal on the data pin (no analog input pins needed). It??s fairly simple to use, but requires careful timing to grab data. The only real downside of this sensor is you can only get new data from it once every 2 seconds, so when using our library, sensor readings can be up to 2 seconds old. Compared to the...

10 pcs Push Button Switches 12x12x6 For Arduino  AVR ARM PCB
Retail: $4.75
Price: $0.90
Availability: Out of Stock
Item #: 82P-AD-Button-10 -

10 pcs Push Button Switches 12x12x6 For Arduino AVR ARM PCB

Breadboard 83X55mm 400pins
Retail: $5.68
Price: $2.00
Availability: Out of Stock
Item #: 82P-AD-BreadBoard -

Breadboard 83X55mm 400pins

Remote Control Blutetooth Ultrasonic Ranging Smart Car Kit
Retail: $180.00
Price: $99.95
Availability: Out of Stock
Item #: 82P-AD-Bluetooth-CarKit -

This is a well designed for Arduino mobile robot development car kit platform. You can build it and program it easily with tons of published free codes. The high-strength body provides flexibility in rapid movement particularly in outdoor grass, gravel, sand or sloped surface. You ?can also mount a variety of sensors to make it more interesting. Features: Brand new bluetooth controlled robot car kits compatible for Arduino Made of high quality material Allows build it and program it easily...

9V Battery Power Lead for Auduino
Retail: $1.90
Price: $0.50
Availability: In Stock
Item #: 82P-AD-9V-PowerLead -

9V Battery Power Lead for Auduino

Antenna 915MHz SMA 3dBi
Retail: $7.95
Price: $4.50
Availability: Out of Stock
Item #: 82P-AD-915MHZ-3DBI -

915MHz antenna. Ideal for 3DR Radios. can be rotated and tilted

LED Matrix 8x8 - Triple Color RGB Common Anode Display
Retail: $12.35
Price: $4.90
Availability: Out of Stock
Item #: 82P-AD-8x8-Triple -

LED Matrix 8x8 - Triple Color RGB Common Anode Display 60mm three-color full-color, RGB common anode LED Display Screen (dot)

Antenna 433MHz RP-SMA 2dBi
Retail: $7.95
Price: $3.50
Availability: In Stock
Item #: 82P-AD-433MHZ-2DBI -

433MHz antenna. Ideal for 3DR Radios. It can be rotated and tilted

2-channel relay module relay expansion board relay module, optical coupling 5V Arduino Compatible
Retail: $8.55
Price: $2.60
Availability: Out of Stock
Item #: 82P-AD-2ch-Relay -

Quick Details: Optical coupling 5V Type: Drive IC Supply Voltage: 1.5V-6V Dissipation Power: 1W-6W Operating Temperature: -40??XC ~ 125??XC Part number: 2-channel relay module Brand: MIC Category: Module Lead Free Status: Lead free / RoHS Compliant Maximum Operating Temperature: -40??XC ~ 125??XC Specifications: Relay contact capacity 250V10A.  Relay output normally open, normally closed; active low.  5V relay signa...

2004  LCD Display Module
Retail: $25.00
Price: $12.50
Availability: In Stock
Item #: 82P-AD-2004LCD-Green -

This module is a low-power consumption LCD Module with a built-in controller. The module can be easily interfaced with a MCU. Display Format: 20 Characters x 4 lines. It is fantastic for Arduino based project. Fully assembled and tested Size: 98mm x 13.9mm x 59.9mm Package include: 1 x 2004 LCD Module Display

192x64 Graphic LCD Display Module (Blue)
Retail: $26.60
Price: $13.00
Availability: In Stock
Item #: 82P-AD-19264-Blue -

Display:?192 X 64 Dots Module Size:?100.0 X 60.0 X 13.0 Viewing Area:?84.0 X 31.0 Dot Size:?0.36?X 0.36 Please click here for Data Sheet

Arduino Robot US Plug
Retail: $382.50
Price: $255.00
Availability: In Stock
Item #: 82P-A001078 -

Overview The Arduino Robot is the first official Arduino on wheels. The robot has two processors, one on each of its two boards. The?Motor Board?controls the motors, and the?Control Board?reads sensors and decides how to operate. Each of the boards is a full Arduino board programmable using the Arduino IDE. Both Motor and Control boards are microcontroller boards based on the?ATmega32u4?(datasheet). The Robot has many of its pins mapped to on-board sensors and actuators. Programming the robot...

Arduino Ethernet Rev3 WITH PoE
Retail: $118.50
Price: $74.95
Availability: In Stock
Item #: 82P-A000074 -

The Arduino Ethernet is a microcontroller board based on the Arduino Uno, and incorporating a WizNet W5100 TCP/IP Embedded Ethernet Controller. It can be programmed like an Uno via a six-pin FTDI -style serial connector. The Arduino USB 2 Serial adapter or any FTDI-style USB-to-serial connector can be used to program it. Additional features coming with the R3 version are: pinout: added SDA and SCL pins for TWI communication placed near to the AREF pin and two other new pins placed...

Arduino ETH Shield Rev3 WITHOUT PoE Module
Retail: $59.93
Price: $36.95
Availability: Out of Stock
Item #: 82P-A000072 -

The Arduino Ethernet Shield allows an Arduino board to connect to the internet. It is based on the Wiznet W5100 ethernet chip (datasheet). TheWiznet W5100 provides a network (IP) stack capable of both TCP and UDP. It supports up to four simultaneous socket connections. Use theEthernet library to write sketches which connect to the internet using the shield. The ethernet shield connects to an Arduino board using long wire-wrap headers which extend through the...

Arduino Ethernet Rev3 WITHOUT PoE
Retail: $86.93
Price: $55.50
Availability: Out of Stock
Item #: 82P-A000068 -

The Arduino Ethernet is a microcontroller board based on the Arduino Uno, and incorporating a WizNet W5100 TCP/IP Embedded Ethernet Controller. It can be programmed like an Uno via a six-pin FTDI -style serial connector. The Arduino USB 2 Serial adapter or any FTDI-style USB-to-serial connector can be used to program it. Additional features coming with the R3 version are: pinout: added SDA and SCL pins for TWI communication placed near to the AREF pin and two other new pins placed...

Arduino Mega2560 Rev3
Retail: $78.00
Price: $49.00
Availability: Out of Stock
Item #: 82P-A000067 -

The Arduino Mega 2560 is a microcontroller board based on the ATmega2560 (datasheet). It has 54 digital input/output pins (of which 14 can be used as PWM outputs), 16 analog inputs, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Mega is...

Arduino Uno Rev3
Retail: $43.43
Price: $27.50
Availability: Out of Stock
Item #: 82P-A000066 -

The Arduino Uno is a microcontroller board based on the ATmega328 (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started. The Uno differs from all preceding boards in that it...

Arduino Due
Retail: $73.50
Price: $45.00
Availability: Out of Stock
Item #: 82P-A000062 -

The Arduino Due is the newcomer microcontroller board in the Arduino boards family. It's the first board based on a 32 bit ARM core processor, the Atmel SAM3X8E ARM Cortex-M3 MCU, that improve all the standard Arduino functionalities and add more new features. It offer 54 digital input/output pins (of which 12 can be used as PWM outputs, with selectable resolution), 12 analog inputs with 12 bit of resolution, 4 UARTs (hardware serial ports), and two DAC outputs (digital to...

Arduino WiFi shield
Retail: $126.00
Price: $82.00
Availability: In Stock
Item #: 82P-A000058 -

The Arduino WiFi Shield connects your Arduino to the internet wirelessly. Connect it to your wireless network by following a few simple instructions to start controlling your world through the internet. As always with Arduino, every element of the platform ? hardware, software and documentation ? is freely available and open-source. This means you can learn exactly how it's made and use its design as the starting point for your own circuits. Check out the reference page of the WiFi...

ATMega328 - microcontroller - bootloader UNO
Retail: $9.75
Price: $6.20
Availability: Out of Stock
Item #: 82P-A000048 -

An ATmega328 in DIP package, pre-loaded with the Arduino UNO (16MHz) Bootloader. This will allow you to use Arduino code in your custom embedded project without having to use an actual Arduino board. To get this chip working with Arduino IDE, you will need an external 16MHz crystal or resonator, a 5V supply, and a serial connection. If you are not comfortable doing this, we recommend purchasing the Arduino Duemilanove or Uno board that has all of these built into the board. Atmel's ATMega328...

Arduino GSM Shield (integrated antenna)
Retail: $133.50
Price: $89.00
Availability: Out of Stock
Item #: 82P-A000043 -

The Arduino GSM Shield allows an Arduino board to connect to the internet, make/receive voice calls and send/receive SMS messages. The Shield uses a radio modem M10 by Quectel (datasheet). It is possible to communicate with the board using AT commands. Use the GSM library to learn more about how to make sketches using one or more of the functions described. Arduino boards use digital pins 2 and 3 for software serial communication with the M10. Pin 2 is connected to the M10?s TX pin and pin 3...

Arduino Yun
Retail: $108.00
Price: $72.00
Availability: In Stock
Item #: 82P-A000008 -

Overview The Arduino Y?n is a microcontroller board based on the?ATmega32u4?(datasheet) and the Atheros?AR9331. The Atheros processor supports a Linux distribution based on?OpenWRT?named Linino. The board has built-in Ethernet and?WiFisupport, a USB-A port, micro-SD card slot, 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16?MHz?crystal oscillator, a micro USB connection, an ICSP header, and a 3 reset buttons. The Y?n distinguishes itself from...