eZRun Series Brushless Electronic Speed Controller
For RC 1/10 Scale Cars and Buggy
Soldiering Installation and Modification Required
(NEED TO
SOLDIER BRUSHLESS MOTOR TO ESC)
Specifications :
| Throttle Mode |
Forward/Brake/Reverse
(programmable) |
| Constant Current |
35A |
| Burst Current |
190A |
| Resistance |
0.0015 ohm |
| Case Size |
31.5mm x 28mm x 34mm (with
cooling fan) |
| Weight |
30g (excluding power
wires) |
| Motor Limit |
Over 8.5 Turns (6
cells) |
| Power Wires |
14AWG Silicone
Wires |
| Voltage Input |
4-9 cells NiMH, 2-3 cells
Li-Po (4.8-11.1V) |
| Programmable |
10 Programmable
Modes |
| Alum Heat sink |
Alum Heat sink with 25mm
Cooling Fan |
| Sensor less |
Yes |
10 programmable modes program card.
Throttle modes (Forward/Brake or Forward/Brake/Reverse)
Drag brake
Low voltage cut-off protection
Start mode (punch)
Maximum brake force
Maximum reverse force
Initial brake
Neutral Range (dead band)
Motor Timing
Over-heat protection
|
UpGrade Kits Included:
35A-SL-V1.1 EZRun Series Sensor less Brushless Speed Controller w/ Reverse
Programmable
Brushless Motor KV 3930
Program Card w/ 10 programmable modes
Soldiering Installation and Modification Required
(NEED TO
SOLDIER BRUSHLESS MOTOR TO ESC)
