Shop The Hottest Toys & Gadgets In The World!

Raptor 90 3D Kit

Raptor 90 3D Kit
Item# TTR4892-K10
$579.95
This item is currently out of stock!

Product Description

Raptor 90 3D

Item No. 4892
Specification
Full Length of Fuselage(mm / in.) 55 1/2" (1410mm) 
Full Width of Fuselage(mm / in.) 7 1/2" (190mm) 
Total Height(mm / in.) 18 1/3" (476mm) 
Main Rotor Dia(mm / in.) 63 1/4" (1605mm) 
Tail Rotor Dia(mm / in.) 10 1/4" (260mm) 
Gear Ratio 8.27:1:4.65 
Full Equipped Weight(g/ lbs.) 10.58 lbs (4800g) 

Introduction

Top Performer

The Raptor 90 3D was specifically-created for the 3D fanatics with the fantastic Raptor 90 SE as a proven foundation. To save weight, we stripped the machine of all "bling-bling" and then injected the must-have upgrades and options to deliver an extreme 3D helicopter.

The aluminum motor hub, the over-sized paddles and a thick airfoil deliver lightening-fast cyclic-response and rock-solid hover.
In addition, three different Bell-Hiller mixing ratios offer nimble, very nimble, and extremely nimble control responses...

If all-out 3D is your thing, then look no more. 

Features

1. Machined metal main rotor hub |
2. New nonlinear stiffness flapping damper
3. Machined metal bearing blocks for main rotor shaft
4. Aluminum seesaw that permits different flybar ratio
5. Bell-Hiller mixing arms with holes for different control sensitivities
6. 3D paddles of 30g and carbon 3D vertical fin
7. Push-pull system for collective and cyclic pitch control
8. Light weight tail boom bracket
9. 8.27 to 1 gear ratio for 3D flying
 


30g light weight paddle & SUS flybar rod

Metal bearings blocker for main rotor shaft

New decal

Light tail boom bracket

Metal Hub & swashplate

SUS push-pull levers