Drive-Train
Type: Shaft-driven all-time 4WD with a center differential
Drive Shafts: Constant Velocity steel shafts.
Differentials: Sealed 6 gear ultra strong differentials. Silicone filled.
Clutch: Aluminum 3pc clutch system
Bearings: All sealed ball bearings |
Chassis
Type: Factory Race" CNC 7075 type "S Chassis
Radio Tray: lay-down steering servo
Braces: Front and Rear Factory Team CNC 7075 chassis Braces |
Tuning Capabilities
Camber: Fully adjustable
Caster: 20 degree - 22 degree of caster
Front Toe in: Fully adjustable
Wheelbase: Adjustable
Front Kick-up: 4 or 5 degree
Rear anti-squat: 1 or 2 degree
Front down travel: Fully adjustable
Rear down travel: Fully adjustable
Ackermann: 3 positions |
Dimensions
Length: 19inches / 485mm
Width: 12inches / 305mm
Wheelbase: 324mm-329mm |
Gearing
Pinion / spur: 13 / 46 |
Suspension
Adjustable suspension: 6 hole option shock towers along with
2 hole arm mounting positions.
Shocks: Machined anodized aluminum, oil-filled coil over shocks with 3.5mm
shock shafts, bladders, and silicone o-rings. |
|
|
Carbon Fiber Radio Tray and
Center Brace:
Very attractive Carbon fiber radio tray and center tray ad strength while
lightening the buggy. |
Extremely Durable:
The Matrix Factory Kit Edition was designed to perform while offering
durability like no other buggy on the market. The first thing that comes to
mind when seeing the Matrix is durability, then once you \drive the Matrix
Factory Kit Edition you will feel the CENsation of performance. |
|
|
CNC 7075 Front suspension
block:
The Matrix Factory Race kit comes with an ultra strong CNC front suspension
block in anodized red. |
CNC 7075 Steel Main T46
Gear
|
|
|
New lightweight CNC
aluminum Clutch shoes and 1.1mm Clutch Spring:
standard on Factory Race edition. These shoes grab the clutch bell with
extreme grip, which allows the buggy to take off on command. CNC aluminum
shoes last longer and deliver bottom end clutch power for racing purposes
|
T13 Machined Steel clutch
bell:
standard on Factory Race edition. Vented to keep the clutch cool and allow
debris to exit. Extreme durable and performance guarantee. |
|
|
CNC 7075 Chassis Brace:
CNC 7075 Aluminum Machined Chassis Stiffeners are included in anodized red
to add strength and stiffen up the Chassis. 7075 Machined Chassis Brace adds
durability to the chassis while making it more rigid for racing purposes.
|
Front polished aluminum C
hub design with maximum steering throw
|
|
|
CNC 7075 Rear Suspension
Block:
CNC 7075 Machined Aluminum Suspension Block adds strength for added
durability. |
Carbon Fiber Rear Shock
Tower:
Carbon Fiber Rear Shock Tower lightens up the Factory Race Matrix without
sacrificing strength. |
|
|
Carbon Fiber Front to
plate:
Carbon Fiber front top plate lightens the Matrix Factory Race kit without
sacrificing strength |
Carbon Fiber Front Shock
tower:
Lightweight Carbon Fiber Front shock tower comes standard on the Matrix
Factory Kit. |
- Factory Race CNC 7075 Hard anodized machined lightweight, ultra low CG
Chassis
- Factory Race Carbon Fiber Front Shock Tower
- Factory Race Carbon Fiber Rear Shock Tower
- Factory Race Carbon Fiber Radio Tray
- Factory Race Carbon Fiber Front Brace
- Factory Race Carbon Fiber Center Brace
- Completely tunable from down-travel to wheel base
- Factory Race CNC 7075 Aluminum Chassis Braces front and rear
- Factory Race CNC 7075 Aluminum front lower suspension block
- Fully adjustable suspension w/ 3.5mm shock shafts
|
- Factory Race CNC 7075 Aluminum rear lower suspension block
- Factory Race CNC 7075 Aluminum clutch shoes
- Ultra beefy Tie Rod ends for durability
- 4 disc metal brake system
- Low profile radio tray for low CG
- Fully adjustable down travel
- Captured rear hinge pins, no e clips needed
- Front and Rear sway bars
- Low Center of Gravity for racing purposes
- Splash resistant fuel tank with added splash guard
- Designed to perform in all racing conditions
- Fully equipped with durable ball bearings
- Smooth action racing shocks with bladders
- Factory Race CNC 7075 Steel Main Gear
|
