Exceed RC Tiger Version F/A 18E Electric Brushless RTF Ready to Fly Jet w/ Lipo, Brushless Motor & ESC

Turn and burn with the ALL-NEW F/A-18E  Tiger Version Electric Ducted Jet from Exceed RC. This EDF jet has everything you ever wanted - high-speed flying, real jet style aerobatics and has one of the BEST low-speed characteristics of any ducted fan airplane ever!  This New F18E Tiger Version has a HUGE presence in the sky.  Exceed RC's high quality foam gives unparalleled durability.  The F18E Tiger Version RTF kit include a ducted fan unit and brushless motor, assembled and balanced. Easy to put together with regular hobby CA and will survive crashes than send balsa and composite planes to the garbage can.  This is simply the BEST LOOKING and MOST ECONOMICAL EDF in its class. Only takes half an hour to put this baby together and you're set to go! 100% Ready to Fly.

Specifications:

• Wingspan: 686mm (27 in)
• Length: 980mm (38.58 in)
• Flying Weight: 560g
• Wing Area: 10g/dm^2
• Wing Load: 56g/dm^2
• 64mm Ducted Fan (2.51 in)
• Servos: Four 9G Servos
• Motor: 14L Brushless Motor
• Speed Controller : 25A
• Power System: 3-Cell 11.1V 1300mAH LiPo Battery ()
• Radio System: 4-Channel TX and 6CH Rx

Highlights:

• Pre-painted foam main fuselage with pre-installed servos (elevator (2) and aileron), brushless motor and fan, receiver compartment and hatch and ESC
• Pre-painted foam fuselage front half. Steering servo, battery compartment and hatch and landing gear (including two front wheels) factory installed.
• Pre-painted foam wings, stabs and fins. Wings and stabs factory hinged
• Pre-bent main landing gear with wheels factory installed
• Pre-painted canopy
• Glue
• Instruction manual
• Foam ordinance
• Miscellaneous building supplies

The paint on the airframe is dazzling with Exceed RC 's good craftsmanship.

The wing is supplied with the ailerons pre-hinged for easy assembly.

Perfect CAD Engineering.