Full time shaft driven 4wd makes the MG16-TC handle like a dream while backed up with a powerful 2.5cc nitro powered motor that screams down the straightaway and powers out of turns.  Burn some rubber with the touch of your fingertip!  The MG16-TC is fully (RTR) Ready To Rock and includes the fully digital and highly advanced Skyion radio system.  Whether you’re on the track or in your neighborhood the MG16-TC will meet and exceed your demands, compared to any other mini nitro touring car in the world! H.I.C.- High Impact Composite
            CEN Racing is always striving to think outside of the box to bring hobby enthusiast the very best product available.  We understand what the hobbyist seeks and expects in a product because we too are hobby enthusiasts.  Our latest development is our state of the art H.I.C. or High Impact Composite.  This composite has been proven and tested to be the most durable composite of its kind.  After months of testing our engineers and research and development department have constructed the H.I.C. material that is exclusively available with the MG series vehicles.  The composite is extremely flexible which will give upon impact.  Not only does the H.I.C. material work effectively in that is doesn't snap or break, but it give the vehicle tons of traction and stability as well.  We understand what the most important aspects to bashing, and jumping your r/c vehicles are, having fun and driving them.  With the new H.I.C. material you will experience more driving time which will lead to more fun which is what the hobby is all about! 
 

	The MG16 with its .stump pulling 2.5cc pull start engine gives the MG16 blistering acceleration. With the MG16's awesome power to weight ratio, you'll still be able to smoke the larger 1/10th scale trucks in a drag race!  Don't be afraid that the power of the MG16 will just lead to you spinning your wheels, with the full time 4WD you won't find yourself short of grip to get the power to the ground.  Stop by your local hobby shop and check out CEN Racing's newest sidekick, the MG16!
	The MG16 is full time shaft driven 4WD with a unique front bevel gear differential coupled with a traditional 3 gear transmission in the rear.    Notice the unique molded chassis, the center cutout allows for the drive shaft to at the same level as the chassis itself, this allows for the MG16 to have a lower overall CG for enhanced handling prowess.    Maintenance on the MG16 is a breeze.  With the simple chassis layout getting to the transmission and differentials are a piece of cake.  Fixed camber links and toe links cut down on the adjustments letting you focus on the more important side of RC, FUN!!        Notice the center drive shaft, its fully protected by the sides of the MG16 chassis.  With the MG16 you won't have to worry about readjusting belts, the shaft driven power With the full time shaft driven 4WD handling the horsepower that the 2.5cc recoil start engine dishes out is no problem!   And if you're skeptical that the 4WD drivetrain isn't enough, CEN SPORT has equipped the MG16 with a slipper clutch to provide enhanced traction and power transfer *Comparison picture between MG16-TC next to a standard size 1/16 Truck
Equipped with 75cc fuel tank and lightweight chassis, the MG16 provides over ten minutes of tire shredding fun on a tank of nitro.  Less refueling and more Driving!	Aside from performance CEN SPORT's engineers designed the MG16 to be easy to service as well.  Remove 8 screws and the front differential is in your hands.  Just unscrew another 8 screws for the rear transmission and you have both front and rear differentials in your hands.	Knowing that the MG16 will see action in the dirt and mud, CEN SPORT designed the MG16 with a fully sealed radio box.  Keeping your electronics safe and sound is critical to having Nitro RC fun day in day out
High Performance Oil Filled Shocks - Adjustable oil filled coil over shocks providing the best on track performance with unlimited adjustability	Innovative transmission features no differential output cups!  The dogbones actually engage an internal hex shaped differential output shaft.  There’s no output cups to wear out!!	MG16 features a ball bearing supported transmission coupled with a slipper clutch to maximize power transfer and enhance traction
	Using resilient composites instead of aluminum, the MG16 combines lightweight with rugged durability.  To reinforce the chassis, CEN SPORT designed the chassis with reinforcement gussets underneath the chassis.  A composite transmission brace ties the transmission to the chassis.   Without this brace the lateral and torsional forces caused by the engine would lead to stripped spur gears, broken engine mounts, and leading to a ruined day of nitro fun.  The MG16-UNIT's arms have been molded out of a composite that allows for increased crash durability but at the same time it is not so flexible that it does not let the suspension do its job.
	Part of the fun of owning an RC car is being able to customize it.  The MG16 doesn't disappoint.  Hop-up potential??  Well the MG16 can use standard size 1/10th scale tires and wheels, so you won't find yourself short of new kicks for your MG16.  Along with alloy shocks, and a wheelie bar, there's plenty of upgrades that you can customize your MG16.

Completely Ready to Run	Skyion DSX Radio System	Lighting fast Acceleration	Full time shaft driven 4WD
Ball bearing supported	Reinforced composite chassis components	Powerful 2.5 Engine	High flow manifold with rear exit exhaust
75cc fuel tank with filter	Built in servo saver	Big Bore Oil Filled Shocks	P & D Body
Sealed receiver and battery Compartment	Single Speed Transmission with Slipper Clutch	Adjustable Suspension geometry	Adjustable toe-in and camber
High Impact front bumper	Stylish 2.2" offroad wheels	High grip v-treaded off road tires	Compatible with 1/10 parts, Unlimited upgrade potential!