2.4Ghz Exceed G2 Quick Features!
- Acrobatic 3D 6 Channel Collective Pitch
- - rubber, alieron, elevator and throttle, 3D conversion and alterable pitch
- Exceed 400 Brushless Motor 3500KV
- 30A Exceed Brushless Speed Controller
- 11.1V 1200mAH LiPo Battery+ Quick Wall AC Charge
- Belt-Driven Tail-One Way Bearing
- Exceed RC Receiver 2.4Ghz
- 2.4Ghz 6 Channel Remote Control Transmitter w/ LCD
- Precise English User Manual
2.4Ghz Exceed-RC G2: Ready to Fly !!!Features:
Glass Rotor Blades
-400 Exceed Brushless Motor
-30A Brushless Speed
-11.1V 1200MAH LiPO Battery
The New Improved 2.4Ghz
Exceed-RC G2 is ready to fly out of the box within minutes. Everything needed to
fly is included and installed such as a battery pack, motor, electronic and a 6
channel 2.4Ghz radio system. All that is needed are 8 "AA" batteries for the
transmitter. Plus, each 2.4Ghz Exceed-RC G2 is test-flown at the factory to
ensure precise performance and control which makes it truly ready to fly right
from the box.
We are also proud to offer this magnificent model as
3D capable right out of the box. Combining the knowledge of RC nitro collective
precision along with the most advanced micro electric design concepts, we have
arrived at a model that excels prepared to wipe out the competition. The 2.4Ghz
Exceed-RC G2 offers collective pitch control that will let helicopter pilots to
fly in almost any direction. Transitioning from forward flight to hover with
smooth, solid control is a cinch and negative pitch is a breeze for aerobatics
like loops and rolls.
The installed mixing board controls
mixing of the main and tail rotors. The board also contains speed controls, a
external gyro for tail stabilizing and a BEC circuit that supplies power to the
receiver and servos
Expect only the best as you experience tight, precise
control and quick response as the Exceed-RC G2 will dazzle you with agility and
speed. Using the basics of micro electric design to keep components light and
durable while distributing heat away from electronic, the Exceed-RC G2 is not
only precise, but also efficient. When you combine precision and efficiency and
add beauty, you will arrive at the 2.4Ghz Exceed-RC G2: The Ultimate Super-Micro
Pre-built Exceed-RC G2 400 size RC
Helicopter, zero assembly time, Ready to fly out of the box
6 channel 2.4Ghz multifunctional
transmitter with 3D conversion. PIT and PLT adjusting
Belt Driven Tail Rotor
One-way bearing system. Flameout
2.4Ghz receiver unit (mixer, motor
controller, receiver), High Quality External electric
Fiber Glass Blade
1200MAH LiPo Battery|
alieron, elevator and throttle, 3D conversion and alterable pitch
Charger w/ Wall
(2.4Ghz Exceed G2
1. The ExceedRC Transmitter adopts 2.4Ghz spectrum
technology and features automatic code pairing and ID memory.
display of the ExceedRC Transmitter is simple to understand and easy to
3. The transmitter case is ergonomically designed and the large
LCD display has white backlight with easy-to-read graphics.
length or tension of the controls stick can be adjusted and it is convenient to
change the throttle from left to right.
5. The ExceedRC Transmitter
supports both helicopters and airplanes. It offers three helicopter flight modes
and each flight mode is capable of free setting and adjusting parameter in order
to suit the various requirements of F3C or 3D aerobatic flights.
Capable of wireless data copy and transfer between two
7. Four Adjustable hot keys facilitate easy entry into
the set menu.
8. Gyro rate adjustment by transmitter, and convenient
programmed hover and 3D flights.