Shop The Hottest Toys & Gadgets In The World!
 |
|
|
Product Description
The Newest Design Walkera #76A-1 (Belt Driven). The latest version of the
outstanding Walkera 76 Series RC helicopter. Now fitted with belt driven tail
rotor system and an all new lower mainframe design which includes upgraded
skid/struts and battery holder.
The Walkera #76A-1 retains the tried and tested components that made the
original so reliable and rewarding to fly. In addition to the new structural
improvements and belt drive, Walkera have modified the tail setup to give even
more responsive control.
This is probably the best ready-to-fly helicopter you can buy... and this
is definitely the place to buy it!
All of the major components are preassembled The 120-degree CCPM head design
uses 3 servos to control the collective pitch and the cyclic controls. Once you
master hovering and slow circuits in "Normal" mode, switch into "Idle Up 1" mode
and Honey Bee King II¡¯s high-performance motor has plenty of power for sport
flying and inverted flight. The tailboom is machined for perfect 90-degree
alignment of the tail rotor to the main rotor without adjustments.
 |
- 6 Channel R/C Set included, complete Forward/Backward, Left/Right,
Up/Down & Pitch Control (RUDDER, AILERON, ELEVATOR, Pitch AND THROTTLE)
- New 6 channel Transmitter with PIT and PLT mode lock switch and
adjustable knob
- Improved blades give superior lift. Their pop off design gives extra
protection in case of heavy landing
- Perfect for people who wants to move up from 4ch helicopter
- Perfect for intermediate pilots or pilots who want to try inverted fly
or 3D aerobatic flight
- CCPM mixing control system and collective pitch structure make perfect
3D maneuvers such as roll, inverted, and swoop flights
- 120 degree CCPM system provides precise movement if comparing with the
traditional mechanical mixing since there are less linkage/push-rod in the
helicopter and weight is greatly reduced
- Bell-heller mixing greatly increase the sensitive of the whole
helicopter, which provide good aerobatic responds
- O-ring inside the center hub reduce oscillation of main blades
- Powerful 370 super carbon brush motor used as the main drive and makes
the flight much stable
- The autorotation landing system, made of high quality one-way bearing,
maximally protects your helicopter from damage
- Hard, Light weight Main Blades
- Brand new design for the structure
- Improved battery support that holds the battery firmly, and can also
be adjusted to suit your balance of flying
- Tail rotor driven by belt provide stable flight and low noise
- NO TAIL Motor - Tail Rotor driven by Belt with Servo Controlled Rudder
like Gas-Helicopter
- No need to worry about burning tail motors
- Light and hardened blades provide great lift, only weight 11g
- Outer placed gyro
- With length-adjustable servo push-rod, precision sub trim can be
easily set
- Approximately 5 - 8 minutes flight time on each charge
- Best choice for Beginner - Advanced hobbyist
- Complete Kit, Ready to Fly (Everything is included and 100%
assembled -- only required 8 AA batteries for the transmitter to start
flying)
|
 |
 |
- Main Rotor Diameter: 550 mm
- Tail Rotor Diameter: 122 mm
- Overall Length: 550 mm
- Receiver: RX- PCM-701
- Drive System: 370 SH
- Battery: Ni-MH 10.8V 650mAh
- All-up Weight: 467g (Battery included)
- Transmitter: WK-PCM-0701
- Gyro: WK-G012
- Speed Controller: WTS-20A-02
- Servo: weight 8.5g ; speed 0.11sec/60o; torque 0.9kg/cm ; dimension
22.5X11.5X24mm
|
Package Include:
- Ready To Fly Helicopter (100% Assembled)
- 6 Channel CCPM Multifunctional FM R/C Transmitter
- Battery: Ni-MH 10.8V 650mAh and charger
- English Manual
 |
